| Piece Type | Quantity |
|---|---|
| 32x32 Baseplate (light bluish gray) | 1 |
| 1x4 Tile (light bluish gray) | 40 |
| 2x2 Tile (dark bluish gray) | 16 |
| 2x4 Plate (green) | 1 |
| 1x4 Tile (brown) | 4 |
| 1x1 Brick (black) | 8 |
| Lamp Post Parts (Pole + Transparent Stud) | 1 |
| 1x2 Brick (white) | 50 |
| 1x4 Brick (white) | 40 |
| 1x4 Transparent Brick | 20 |
| 3-stud Wide Transparent Door | 1 |
| 2x2 Tile (white) | 40 |
| 2x2 Tile (light bluish gray) | 40 |
| 1x1 Round Plate (green) | 5 |
| 1x1 Transparent Round Stud | 4 |
| 1x1 Round Tile (black) | 6 |
| 1x1 Plate (transparent blue) | 6 |
| 2x2 Round Tile (transparent) | 4 |
| 1x6 Plate (gray) | 12 |
| 2x4 Plate (gray) | 16 |
| 1x1 Brick (gray) | 8 |
| 1x1 Tile (white) | 16 |
| 1x4 Slope (white) | 4 |
| 2x2 Round Plate (light bluish gray) | 5 |
| 2x4 Plate (white) | 10 |
| 1x2 Tile (white) | 10 |
| 2x4 Plate (transparent) | 4 |
| 4x4 Plate (transparent) | 2 |
| 2x4 Plate (green) | 1 |
| 2x4 Plate (light gray) | 5 |
| 2x2 Plate (gray) | 10 |
| 1x1 Plate (yellow) | 4 |
| 2x4 Plate (yellow) | 2 |
| Transparent Clear Studs (for lighting) | 8 |
| 1x2 Slope (white) | 2 |
| 1x1 Tile (transparent white) | 4 |
| 1x1 Round Plate (gray) | 10 |
| 1x2 Technic Pin | 8 |
| 2x2 Slope (gray) | 4 |
| 1x2 Plate (gray) | 20 |
| 1x4 Tile (gray) | 8 |
| 2x4 Brick (transparent) | 4 |
| 4x4 Tile (gray) | 4 |
| 2x2 Tile (transparent blue) | 8 |
| 4x4 Plate (yellow) | 2 |
| 4x6 Plate (yellow) | 1 |
| 2x4 Plate (green) | 3 |
| 1x1 Plate (transparent gray) | 6 |
| 1x2 Brick (transparent white) | 4 |
Baseplate: Start by placing a 32x32 baseplate as the foundation.
Sidewalk: Add light grey tiles (1x4) along the edges to form the sidewalk and 2x2 dark grey tiles in the corners for drain covers.
Bush/Plant: Use a 2x4 green plate to represent a small plant near the front-left corner.
Bench: Create a simple bench using 1x4 brown tiles for the seat and 1x1 black bricks for the legs.
Lamp Post: Build a lamp post by combining a black pole with a transparent stud for the light.
Build Walls: Using 1x2 and 1x4 white bricks, create a frame leaving 2 studs on each side.
Door & Windows: Add a 3-stud wide transparent door and use 1x4 transparent bricks for tall windows on each side of the lobby.
Interior:
Build a reception desk with a 1x6 plate and a computer tile.
Add a small couch using 1x4 tiles and 1x2 slopes for the backrest.
Place a small plant using a 1x1 round plate and green stem pieces.
Elevator: Include an elevator shaft in the back corner, utilizing a 4x4 Technic brick and door.
Wall Construction: Use 1x2 white bricks to build the walls, extending up to 7 bricks tall.
Windows: Insert 1x4 transparent panels across the front and side walls.
Rooms:
Two rooms per floor: Each room contains a bed (using 2x4 plates and 1x2 tiles as pillows), a small table (1x1 round tile), and a bathroom (toilet using 1x1 modified bricks).
Tile the floor: Use 2x2 white tiles to create a clean, sleek floor design.
Penthouse Base: Use a 32x32 plate for the penthouse suite.
Build Walls: Build walls with white and light grey bricks to frame the penthouse.
Interior:
Bedroom: Construct a luxury bed, along with a TV wall and seating.
Kitchen/Dining: Add an open dining area with table and chairs.
Balcony: Include a small balcony area using railings and 2x4 plates, with plants and chairs.
Rooftop Walls: Build walls 1 brick high around the perimeter of the roof.
Helipad: Place a large black tile for the helipad with a white "H" symbol.
Additional Features: Add a satellite dish, AC units, and antennas with small transparent red round tiles for warning lights.